Aeration is the process of mixing air into water, causing dissolved materials such as iron and manganese to oxidize so that they can be readily filtered. The O₂Hydro incorporates a patented Mass Transfer Tube activated by a flow switch which allows the system to oxidize in real time, so that the aeration process occurs when water is in demand. In other systems the aeration process is only activated when the well pump is running, which may not necessarily cycle on when water is flowing to the home, and as a result not all the water is aerated. The mass transfer tube injects air directly into the water and agitates it, creating countless, micro air bubbles. These micro air bubbles provide increased surface contact area, resulting in more rapid and thorough oxidation.
The water enters the filtration tank which incorporates a proprietary depth filtration media package. The O₂Hydro utilizes 4 different media with different filtering properties that are layered in a unique manner. The proprietary blend of media used in the O₂Hydro will remove high levels of iron, manganese, sediment, and other contaminants to extremely low levels, providing clean, fresh water. An additional benefit is that during the backwashing cycle the O₂Hydro media package will automatically resettle in the same configuration, maintaining the integrity of the filtration process.
After the media tank there is a 5 micron post filter for further filtration. Alternatively, the post filter can house specific media to address additional concerns and provides the capability to chlorine shock the plumbing system.
• Whole House Tank System
• Mass Transfer Tube for Superior Filtration
• Removes up to 12 ppm Iron
• Removes up to 7 ppm Hydrogen Sulfide
• Operates within a wide pH range
• No Salt or Chemicals
• No Electrician Needed
• All Components Included for Easy Installation
O₂Hydro Single Tank System
Tank is 10″ x 54″
The completely assembled system is 10″w x 16″d x 62″h
Includes One tank, Mass Transfer Tube, Control Valve, and Bypass.
|Specifications||O₂Hydro Single Tank**|
|Max Iron (ppm)||12|
|Max Hydrogen Sulfide (ppm)||7|
|Max Manganese (ppm)||4|
|Operates in pH Range||6.0 – 8.5*|
|Effective Flow Rate (gpm)||10|
|* In the presence of gases, the effective pH range of operations is 6.0 – 8.5.|
|** No Aeration tank included.|
September 22, 2016
September 15, 2016
August 26, 2016