Calcium and Magnesium in water develops into limescale which sticks to plumbing surfaces, heating elements and fixtures. The appearance of spotting or stains is indicative of a bigger problem within the plumbing system. Limescale encrusts heating elements in appliances robbing them of energy efficiencies and leading to early equipment failure. It will also clog pipes and restrict water flow. The Battelle Study on hard water found a 24% loss of energy efficiency in water heaters and a 75% decrease in water flow from shower heads due to limescale buildup.
The HydroCare Smart Descaler utilizes a revolutionary, patented, frequency of radio wave signals to prevent and eliminate existing limescale buildup. The Smart Descaler generates a continuous, strong signal which causes an ionic attraction between the calcium and magnesium so that they bond together to form microscopic crystals instead of adhering to pipes or heating elements. These crystals stay suspended in the water irrespective of whether water is flowing, and then wash out with the water flow. As they travel throughout the plumbing system, the crystals will also peel away at any existing limescale buildup keeping all pipes and water appliances in pristine condition.
• Prevent & Remove Existing Limescale
• Save $$$ on Appliance Repair & Replacement
• Green Solution – No Salt, No Magnetic Coils, No Chemicals
• Keeps Healthy Minerals in the water
• Strong Signal throughout entire plumbing system
• Continuous Self-Monitoring of signal effectiveness
• 24/7 Operation. Signal transmitted even without water flow
• Only Pennies a day to operate
• Easy to Install – No Plumbing Required
• Works in all levels of hardness
Dimensions: 10 ½ x 8 ½ x 2 ½.
Uses only 10 watts
Works on all types of pipes and sizes from ¾” – 2”
Better than Salt-based Softeners
• Municipalities are banning softeners because of the negative environmental impact cost of salts, chemicals, and backwashing.
• Smart Descaler does not add anything to the water
• Smart Descaler does not remove the healthy calcium and magnesium minerals
• Saves Money – No Servicing, No Salt Bags
• No wasted water with backwashing
• No Maintenance
What is “Hard Water?”
“Hard water” is the term used to describe water containing elevated concentration of calcium and magnesium. The amounts of these minerals determine the level of “hardness” which can be measured in parts per million (ppm) or grains.
What is “Limescale?”
When calcium and magnesium found in water sticks to pipes and heating elements in appliances, they form a continuously growing whitish layer of deposit called “limescale.”
How does Limescale buildup affect me?
Limescale that forms over heating elements of appliances acts as an insulator. As such, more energy is needed to transfer heat to the water, robbing your appliances of energy efficiency. It also will cause you to waste water as water will have to run longer before it comes out hot. Limescale can also cause appliance failure resulting in hundreds of dollars in repair work and early replacement. Limescale in pipes will restrict the flow of water which will decrease water pressure throughout the house.
How does the HydroCare Smart Descaler work?
Utilizing a patented, frequency of radio wave signals, the Smart Descaler causes an ionic attraction between calcium and magnesium molecules so that they bond to each other instead of to pipes and heating elements, forming microscopic, stable crystals which remain suspended and wash out with the regular water flow.
What about existing Limescale?
The crystals formed interact with existing scale and slowly removes it.
Do I need to use salt?
No. Unlike water softeners, there is no salt required which means there is no backwashing required and no sodium added to your water. It is a healthy and green solution to hard water problems.
Are there any additional costs?
Does the Smart Descaler remove healthy minerals?
No. Unlike water softeners which remove healthy mineral content from the water, the technology incorporated in the HydroCare system allows for the healthy minerals of calcium and magnesium to remain in the water, so you get the health benefits without the negative effects of limescale formation.
Does the Smart Descaler add anything to the water?
No. The system does not add anything to the water nor does it change the composition of the water at all. The pH level will also remain unchanged.
How much electricity does the Smart Descaler use?
It only uses 10 watts, costing only pennies a day to operate.
How do I know if the Smart Descaler is working?
The unit contains a self-monitoring computer chip to ensure maximum efficiency. There is an exterior LED display to let you now if the unit is operating and if it is placed in the optimal location.
September 22, 2016
September 15, 2016
August 26, 2016